2 Mart 2012 Cuma

EOS 5D Mark III

EOS 5D Mark III


Digital SLR Cameras




Overview

The Power to Create.
Canon is proud to present the highly anticipated EOS 5D Mark III. With supercharged EOS performance and stunning full frame, high-resolution image capture, the EOS 5D Mark III is designed to perform. Special optical technologies like the 61-Point High Density Reticular AF and an extended ISO range of 100-25600 (expandable to 50 (L), 51200 (H1) and 102400 (H2) make the EOS 5D Mark III ideal for shooting weddings in the studio or out in the field, and great for still photography. Advanced professional-level high definition video capabilities (that includes a host of industry-standard recording protocols and enhanced performance) make it possible to capture beautiful cinematic movies in EOS HD quality. A newly designed 22.3 Megapixel full-frame Canon CMOS sensor, Canon DIGIC 5+ Image Processor, and shooting performance up to 6.0 fps provide exceptional clarity and sharpness, even when capturing rapidly-unfolding scenes. Additional technological advancements include an Intelligent Viewfinder, Canon's advanced iFCL metering system, High Dynamic Range (HDR), and Multiple Exposure mode — all of which that help make the EOS 5D Mark III the perfect multimedia tool.



Features

Brilliant Sensor, Supercharged Processors.

22.3 Megapixel full-frame CMOS sensor
The EOS 5D Mark III features a newly developed Canon full-frame 22.3 Megapixel CMOS sensor that?s designed from the ground up to create high resolution, perfectly detailed images with unprecedented speed and clarity. A full 24 x 36mm, the sensor captures 5784 x 3861 large individual 6.25 µm pixels and has a much-improved S/N ratio resulting in better images from the start. A new photodiode structure with an increased photoelectric conversion rate increases the sensor's sensitivity by approximately 2 stops over previous models, meaning higher ISOs with the lowest noise of any EOS digital camera. And a 2-line 8-channel simultaneous signal readout means speeds of up to 6.0 fps (RAW + JPEG) are possible!

14-bit A/D conversion, wide range ISO setting 100-25600 (L: 50, H1: 51200, H2: 102400) 
The EOS 5D Mark III not only offers 14-bit signal processing for excellent image gradation, it delivers higher standard and expanded ISOs, and a score of new options to enhance shooting in varied and fast-changing lighting situations. With a standard range of ISO 100-25600, the EOS 5D Mark III represents a 2-stop increase in sensitivity over previous cameras. Thanks to the improved signal-to-noise ratio of the new sensor and powerful noise reduction, the EOS 5D Mark III can shoot at expanded sensitivities down to ISO 50 (L) and up to 51200 (H1), and even 102400 (H2)! Beyond the obvious advantages of its wide ISO range, the EOS 5D Mark III has automatic ISO settings, found on the dedicated ISO menu. Minimum and maximum ISO settings can be specified, as can a user-defined range, plus full auto and manual.

DIGIC 5+ Image Processor for enhanced noise reduction and blazing processing speed 
For a whole new level of performance, the EOS 5D Mark III uses a DIGIC 5+ Image Processor. Working with two 4-channel A/D converter front-end processing circuits, and delivering speeds of up to 6.0 fps (RAW + JPEG), and the DIGIC 5+ Image Processor improves data processing performance and features new algorithms that promote greater noise reduction at higher ISOs. In addition to conventional image processing functions the DIGIC 5+ Image Processor offers real-time compensation for chromatic aberration in both still and motion images. With the power of this processor, speed improvements are noticeable from the instant the camera is turned on and the stunning results speak for themselves.




Specifications

Type
Digital, AF/AE single-lens reflex, camera
Recording Media
CF Cards (Type I); Compatible with UDMA CF cards; SD, SDHC, and SDXC Memory Cards
Image Format
Approx. 36 mm x 24mm (35mm Full-frame)
Compatible Lenses
Canon EF Lenses (excluding EF-S Lenses)
Lens Mount
Canon EF mount

Back to TopImage Sensor

Type
High-sensitivity, high-resolution, large single-plate CMOS sensor
Pixels
Effective pixels: Approx. 22.3 megapixels
Total Pixels
Total pixels: 23.4 megapixels
Aspect Ratio
3:2 (Horizontal: Vertical)
Color Filter System
RGB primary color filters
Low Pass Filter
Fixed position in front of the image sensor
Dust Deletion Feature
(1) Self Cleaning Sensor Unit

·Automatic Sensor Cleaning

·Removes dust adhering to the infrared- and ultraviolet-blocking glass.

·Self-cleaning executed automatically when power is turned on or off. Manual execution also possible.

·Low-pass filter has a fluorine coating.

(2) Dust Delete Data acquisition and appending

·The coordinates of the dust adhering to the infrared- and ultraviolet-blocking glass are detected by a test shot and appended to subsequent images.

·The dust coordinate data appended to the image is used by the provided software to automatically erase the dust spots.

(3) Manual cleaning

Back to TopRecording System

Recording Format
Design Rule for Camera File System 2.0 and EXIF 2.3
Image Format
Still Image: JPEG, RAW (14-bit Canon Original), M-RAW, S-RAW, RAW+JPEG, M-RAW+JPEG, S-RAW+JPEG

Video: MOV (Image data: H.264/MPEG-4 AVC; Audio: Linear PCM)
File Size
(1) Large: Approx. 22.10 Megapixels (5760 x 3840)

(2) Medium: Approx. 9.80 Megapixels (3840 x 2560)

(3) S1 (Small 1): Approx. 5.50 Megapixels (2880 x 1920)

(4) S2 (Small 2): Approx. 2.50 Megapixels (1920 x 1280)

(5) S3 (Small 3): Approx. 350,000 Pixels (720 x 480)

(6) RAW: Approx. 22.10 Megapixels (5760 x 3840)

(7) M-RAW: Approx. 10.50 Megapixels (3960 x 2640)

(8) S-RAW: Approx. 5.50 Megapixels (2880 x 1920) Exact file sizes depend on the subject, ISO speed, Picture Style, etc.
Recording Functions
1. Standard

* Records to either the CF card or SD card.

2. Auto switch card

* When the current card becomes full, the camera switches to the other card automatically.

3. Record separately

* The CF card and SD card record the same image at a different image recording quality (L, M, S1, S2, S3, RAW, M-RAW, S-RAW)

4. Record to multiple

* Both the CF card and SD card record the same image at the same image recording quality. (Also applies to RAW+JPEG, M+JPEG, and SRAW+JPEG)
Backup Recording
Images recorded in a card can be copied to the other card
File Numbering
The following three types of file numbers can be set:

(1) Continuous numbering

* The continuous numbering of captured images will continue even after you replace the camera's card. (The numbering continues even when the folder changes.)

(2) Auto reset

* When you replace the camera's card, the numbering will be reset to start from 0001. If the new card already contains images, the numbering will continue from the last recorded image in the card.

(3) Manual reset

* Resets the file number to 0001, and creates a new folder automatically.
RAW + JPEG Simultaneous Recording
The image-recording quality can be selected in any combination of the three RAW and eight JPEG recording quality settings.
Color Space
Selectable between sRGB and Adobe RGB
Picture Style
Auto, Standard, Portrait, Landscape, Neutral, Faithful, Monochrome, User Defined 1-3

* Scene Intelligent Auto will set [Auto] automatically.

* [Standard] is the default setting for [User Def. 1-3]

Back to TopWhite Balance

Settings
(1) Auto (AWB)

(2) Daylight

(3) Shade

(4) Cloudy

(5) Tungsten light

(6) White fluorescent light

(7) Flash

(8) Custom (Custom WB)

(9) Color temperature

* With an EX-series Speedlite having the color temperature information transmission feature, the color temperature setting changes to match the color temperature when the flash is fired. Set to approx. 6000K if the flash unit does not have the color temperature communication feature.
Auto White Balance
Auto white balance with the image sensor
Color Temperature Compensation
Blue/amber bias: ±9 levels

· Magenta/green bias: ±9 levels

* Corrected in reference to the current WB mode's color temperature.
Color Temperature Information Transmission
Provided

Back to TopViewfinder

Type
Eye-level pentaprism
Coverage
Approx. 100% vertically and horizontally (At approx. 21mm eyepoint)
Magnification
Approx. 0.71x / Angle of view 34.1° (with 50mm lens at infinity, -1 m-1 (dpt))
Eye Point
Approx. 21mm (At -1m-1 from the eyepiece lens center)
Dioptric Adjustment Correction
-3.0 to +1.0m-1 (diopter)
Focusing Screen
Fixed
Mirror
Quick-return half mirror (transmission: reflectance ratio of 40:60)
Viewfinder Information
·AF information

AF point, focus confirmation, AF status indicator

·Exposure information

Shutter speed, aperture, ISO speed (always displayed), AE lock, exposure level, exposure warning

·Flash information

Flash ready, flash exposure compensation, high-speed sync, FE lock, red-eye reduction light

·Image information

Highlight tone priority (D+), maximum burst (2-digit display), card information

·Battery check

·Composition information

Grid, electronic level

·Warning symbol

Displayed if any of the following is set: Monochrome, white balance correction, One-touch recording quality switch, expanded ISO speed, or spot metering.
Depth Of Field Preview
Enabled with Depth-of-field preview button

Back to TopAutofocus

Type
TTL secondary image - registration, phase detection
AF Points
61-point (up to 41 cross-type points)

* One to five cross-type AF points at f/2.8, 10 to 20 cross-type AF points at f/4, and 15 to 21 cross-type AF points at f/5.6. (The number of cross-type AF points will differ depending on the lens.)
AF Working Range
EV -2 - 18 (at 73°F/23°C and ISO 100)
Focusing Modes
(1) Autofocus

·One-Shot AF

·Predictive AI Servo AF

   -For automatic AF point selection, the AF point to start the AI Servo AF operation can be selected.

   -For automatic AF point selection, the active AF point can be displayed.

·AI Focus AF

   -(Switches between One-Shot AF and AI SERVO AF automatically)

   -Automatically set in A+ Auto Mode

(2) Manual focus (MF)
AF Point Selection
1. Single-point AF (Manual selection)

2. Auto selection 61-Point AF

3. Single-point Spot AF (Manual selection)

4. AF point expansion (Manual selection, 4 points: Up, down, left, and right)

5. AF point expansion (Manual selection, surrounding 8 points)

6. Zone AF (Manual zone selection)
Selected AF Point Display
Displayed in viewfinder with transparent LCD and on LCD panel
Active AF Point Indicator
AF area used in horizontal/vertical (grip up or down) shooting and the manually-selected AF point position can be set separately
AF Assist Beam
(1) Enable

With an EOS-dedicated Speedlite, AF-assist beam is emitted automatically when necessary.

(2) Disable

(3) IR AF assist beam only

* No AF-assist beam with flash bursts.

Back to TopExposure Control

Metering Modes
Max. aperture TTL metering with 63-zone SPC with the following selectable modes:

(1) Evaluative metering (linked to all AF points)

(2) Partial metering (center, approx. 7.2% of viewfinder)

(3) Spot metering (center, approx. 1.5% of viewfinder)

·AF point-linked spot metering not provided.

(4) Center-weighted average metering

a. The selectable metering modes can be limited with a Custom Function.
Metering Range
EV 1-20 (at 73°F / 23°C with 50mm f/1.4 lens at ISO 100)
Exposure Control Systems
(1) Scene Intelligent Auto

(2) Program AE (shiftable)

(3) Shutter-priority AE (Safety shift possible)

(4) Aperture-priority AE (Safety shift possible)

(5) Manual exposure

* The metering mode can be specified with a Custom Function.

(6) Bulb

(7) E-TTL II autoflash program AE

* Evaluative metering, Averaged metering
ISO Speed Range
For Stills:

ISO 100-25600 (in 1/3-stop or whole-stop increments)

·ISO speed expansion possible to ISO 50, 51200, and 102400.

·For [Highlight tone priority], the settable ISO speed range will be 200-25600.

·ISO speed safety shift possible with Custom Function.
Shooting ModeISO Settings
A+100-12800
P/Tv/Av/M100-25600
BISO 400 fixed
With FlashISO 400 fixed∗
∗If fill flash will result in overexposure, minimum ISO 100 is set.
∗For bounce flash, ISO 400-1600 is set automatically depending on the light level.


ISO Speed upper and lower limits:

(1) Manual setting range

* ISO speed expansion is set with this option.

(2) Auto ISO range

* ISO speed expansion not settable.

Shutter speed and automatic ISO speed control in P and Av Modes:

In the P and Av shooting modes with Auto ISO set, the ISO speed is set automatically so that a shutter speed slower than the one set with [Minimum shutter speed] (1/250, 1/125, 1/60, 1/30, 1/15, 1/8, 1/4, 0"5, 1") is not set.

Exposure Compensation
Manual: ±5 stops in 1/3 or 1/2-stop increments

AEB: ±3 stops in 1/3 or 1/2-stop increments

* Indicated up to ±3 stops on the LCD panel and in the viewfinder.
AE Lock
(1) Auto AE lock

·In the One-Shot AF mode with evaluative metering, AE lock takes effect when focus is achieved.

(2) Manual AE lock

·With AE lock button. (AE lock is updated each time you press the button.) Enabled in all metering modes.

Back to TopShutter

Type
Vertical-travel, mechanical, focal-plane shutter with all speeds electronically-controlled
Shutter Speeds
1/8000 to 1/60 sec., X-sync at 1/200 sec.

1/8000 to 30 sec., bulb (Total shutter speed range. Available range varies by shooting mode.)

* Shutter speed's control range can be set with a Custom Function.
Shutter Release
Soft-touch electromagnetic release
Self Timer
10-sec. or 2-sec. delay

Back to TopExternal Speedlite

EOS Dedicated Speedlite
E-TTL II autoflash with all EX Series Speedlites
Zooming to Match Focal Length
Provided
Flash Exposure Compensation
±3 stops in 1/3- or 1/2-stop increments
FE Lock
Provided
External Flash Settings
The camera can set the following with Speedlite 600EX-RT, 580EX II, 430EX II, 320EX, 270EX II, or 270EX:

(1) External flash control

* Flash mode, sync setting, FEB (not possible with 270EX II/270EX), flash exposure compensation, E-TTL II, zoom, wireless master flash (not possible with 430EX II/ 270EX), and clear settings.

* With the Speedlite 600EX-RT, radio wireless control is possible.

(2) Flash Custom Function setting
PC Terminal
Provided (no polarity)

Back to TopDrive System

Drive Modes
Single, High-speed continuous, Low-speed continuous, Silent Single Shooting and Self-timer (10 sec. self-timer/remote control, or 2-sec. self-timer/remote control)
Continuous Shooting Speed
High-speed: Maximum approx. 6 shots/sec.

Low-speed: Maximum approx. 3 shots/sec.

Silent continuous shooting: Maximum approx. 3 shots/sec.
Maximum Burst
·JPEG Large/Fine: Approx. 65 shots (approx. 16270 shots)

·RAW: Approx. 13 shots (approx. 18 shots)

·RAW+JPEG Large/Fine: Approx. 7 shots (approx. 7 shots)

*Figures are based on Canon's testing standards (ISO 100 and Standard Picture Style) and a 8 GB card.

*Figures in parentheses apply to an UDMA mode 7, 128 GB card based on Canon's testing standards.

Back to TopLive View Functions

Shooting Modes
Still photo and video recording
Focusing
(1) Autofocus (One-Shot AF)

·Live mode

·One-point, contrast AF. Switching to another AF point possible.

·Face detection Live mode

·Face detection, contrast AF. Face selectable.

·Quick mode

61-point, phase-difference AF, same as normal shooting.

(2) Manual focus

* Magnify the image by 5x or 10x and focus manually.
Metering Modes
Real-time Evaluative metering with the image sensor
Metering Range
Real-time evaluative metering with image sensor:

·Metering range: EV 0 - EV 20 (At 73°F/23°C, 50mm f/1.4 lens, ISO 100)

·AE lock possible

·The active metering time can be changed.
Grid Display
Three grid display provided
Exposure Simulation
Provided
Silent Shooting
Provided (Mode 1 and 2)

Back to TopVideo Shooting

File Format
MPEG-4 AVC / H.264

Variable (averaged) bit rate
File Size
Recording Sizes:

1920 x 1080 (Full HD), 1280 x 720 and 640 x 480
Frame Rates
[1920 x 1080]: 30 fps / 25 fps / 24 fps

[1280 x 720]: 60 fps / 50 fps

[640 x 480]: 30 fps / 25 fps
Continuous Shooting Time
Based on 8GB Card:

[1920 x 1080]

30 fps ALL-I: 11 min. (685 MB/min.) / IPB: 32 min (235 MB/min.)

25 fps ALL-I: 11 min (685 MB/min.) / IPB: 32 min. (235 MB/min.)

24 fps ALL-I: 11 min. (685 MB/min.) / IPB: 32 min. (235 MB/min.)

[1280 x 720]

60 fps ALL-I: 12 min. (610 MB/min.) / IPB: 37 min. (205 MB/min.)

50 fps ALL-I: 12 min. (610 MB/min.) / IPB: 37 min. (205 MB/min.)

[640 x 480]

30 fps IPB: 97 min. (78 MB/min.)

25 fps IPB: 97 min. (78 MB/min.)

* If the recording time reaches 29 min. 59 sec., the movie shooting stops automatically.

* Movie shooting does not stop when the file size reaches 4GB.
Focusing
Same as focusing with Live View shooting

* During movie shooting or if movie cropping has been set, the image cannot be magnified for manual focusing.
Range
ISO Range

·P, Av, and Bulb: Automatically set within ISO 100 - 12800, expandable to H (equivalent to ISO 25600)

·A+ and Tv: Automatically set within ISO 100 - 12800

·M: Auto ISO (automatically set within ISO 100 - 12800), ISO 100 - 12800 set manually (in 1/3- or whole-stop increments), expandable to H (equivalent to ISO 16000/20000/25600)

* If Highlight tone priority is set to enable, the settable ISO speed range will be ISO 200 - 12800.
Exposure Control
(1) Program AE for movie shooting

* For shooting modes other than manual exposure and bulb.

* Shutter speed (1/30 - 1/4000 sec., signal accumulation time), aperture, and ISO speed automatically set.

(2) Manual exposure

* For manual exposure.

* Shutter speed (signal accumulation time), aperture, and ISO speed (auto/manual) manually set. The shutter speed (signal accumulation time) is limited to 1/4000 sec. at the maximum and to 1/30 sec. at the minimum for 24/25/30 fps or 1/60 sec. or higher for 50/60 fps.
Exposure Compensation
Up to ±3 stops in 1/3-stop increments

* For movies, even if exposure compensation has been set beyond ±3 stops, exposure compensation up to only ±3 stops will be applied.

* For still photos, exposure compensation up to ±5 stops can be applied.

Back to TopLCD Monitor

Type
TFT color, liquid-crystal monitor
Monitor Size
3.2-inches
Pixels
Approx. 1.04 million dots
Coverage
Approx. 100%

Approx. 170° vertically and horizontally
Brightness Control
Auto: Brightness adjusted automatically by the light sensor

* Adjustable to one of three levels: Darker, Standard, Brighter

Manual: Adjustable to one of seven brightness levels
Interface Languages
25 (English, German, French, Dutch, Danish, Portuguese, Finnish, Italian, Norwegian, Swedish, Spanish, Greek, Russian, Polish, Czech, Hungarian, Romanian, Ukraine, Turkish, Arabic, Thai, Simplified/Traditional Chinese, Korean, Japanese)

Back to TopPlayback

Display Format
Single image, Single image + Image-recording quality/shooting information, histogram, 4- or 9-image index, magnified view (approx. 1.5x-10x), rotated image (auto/manual), image jump (by 10/100 images, index screen, by shooting date, by folder), two-image comparative display, slide show (all images/selected by date/folder), star rating
Highlight Alert
With single-image display (Info.) and single-image display, overexposed highlight areas will blink

Back to TopImage Protection and Erase

Protection
Erase protection can be applied or canceled for a single image, all images in a folder or all images in the card
Erase
Erase a single image, selected images, all images in a folder, all images in a card or erase only unprotected images

Back to TopDirect Printing

Compatible Printers
PictBridge-compatible printers
Printable Images
RAW and JPEG images complying to Design rule for Camera File System

·Movies cannot be printed

Back to TopDPOF: Digital Print Order Format

DPOF
Version 1.1 compatible

Back to TopDirect Image Transfer

Compatible Images
JPEG and RAW images and movie

For RAW+JPEG, only the RAW or JPEG image or both images can be transferred

Back to TopCustomization

Custom Functions
13 Custom Functions settable with the camera
Camera User Settings
Current camera settings can be registered to C1, C2 and C3 on the Mode Dial (Automatic registration update is possible)
My Menu Registration
Up to six top-tier menu options and Custom Function settings can be registered

Back to TopPower Source

Battery
One Battery Pack LP-E6

AC power can be supplied with the AC Adapter Kit ACK-E6
Battery Life
1) Camera body only:
Shooting MethodTemperaturePossible Shots
Viewfinder ShootingAt 73°F/ 23°CApprox. 950
At 32°F/ 0°CApprox. 850
Live View shootingAt 73°F/23°CApprox. 200
At 32°FF/ 0°CApprox. 180

2) With Battery Grip BG-E11:

Shooting MethodBatteryTemperaturePossible Shots
Viewfinder ShootingLP-E6 x 1Same as (1)
LP-E6 x 2At 73°F/ 23°CApprox. 1900
At 32°F/ 0°CApprox. 1700
Size AA/LR6 alkaline batteriesAt 73°F/ 23°CApprox. TBA
At 32°F/ 0°CApprox. TBA
Live View shootingLP-E6 x 1Same as (1)
LP-E6 x2At 73°F/ 23°CApprox. TBA
At 32°F/ 0°CApprox. TBA
Size AA/LR6 alkaline batteriesAt 73°F/ 23°C-
At 32°F/ 0°C-
∗Based on CIPA testing standards
Battery Check
Automatic battery check when the power switch is turned on:

Displayed in 6 levels:

·Battery level displayed on LCD panel and in viewfinder.

·Battery information can be checked with the [Battery info.] menu

·If Battery Grip BG-E11 is used with size AA/LR6 batteries; the battery level is displayed in four levels instead.
Power Saving
Power turns off after the set time (1, 2, 4, 8, 15 or 30 minutes) of non-operation elapses.
Date/Time Battery
CR1616 lithium battery
Start-up Time
Approx. 0.1 sec

Back to TopDimensions and Weight

Dimensions (W x H x D)
Approx. 6.0 x 4.6 x 3.0 in. (152.0 x 116.4 x 76.4 mm )
Weight
Approx. 33.5 oz. / 950g (Based on CIPA standards)

Approx. 30.3 oz./ 860g (Body only)

Back to TopOperating Environment

Working Temperature Range
32-104°F/0-40°C
Working Humidity Range
85% or less


Hiç yorum yok:

Yorum Gönder